stm32l4xx_hal_conf.h
Go to the documentation of this file.
1
/* USER CODE BEGIN Header */
2
/**
3
******************************************************************************
4
* @file stm32l4xx_hal_conf.h
5
* @author MCD Application Team
6
* @brief HAL configuration template file.
7
* This file should be copied to the application folder and renamed
8
* to stm32l4xx_hal_conf.h.
9
******************************************************************************
10
* @attention
11
*
12
* Copyright (c) 2017 STMicroelectronics.
13
* All rights reserved.
14
*
15
* This software is licensed under terms that can be found in the LICENSE file
16
* in the root directory of this software component.
17
* If no LICENSE file comes with this software, it is provided AS-IS.
18
*
19
******************************************************************************
20
*/
21
/* USER CODE END Header */
22
23
/* Define to prevent recursive inclusion -------------------------------------*/
24
#ifndef STM32L4xx_HAL_CONF_H
25
#define STM32L4xx_HAL_CONF_H
26
27
#ifdef __cplusplus
28
extern
"C"
{
29
#endif
30
31
/* Exported types ------------------------------------------------------------*/
32
/* Exported constants --------------------------------------------------------*/
33
34
/* ########################## Module Selection ############################## */
35
/**
36
* @brief This is the list of modules to be used in the HAL driver
37
*/
38
#define HAL_MODULE_ENABLED
39
/*#define HAL_ADC_MODULE_ENABLED */
40
/*#define HAL_CRYP_MODULE_ENABLED */
41
/*#define HAL_CAN_MODULE_ENABLED */
42
/*#define HAL_COMP_MODULE_ENABLED */
43
#define HAL_I2C_MODULE_ENABLED
44
/*#define HAL_CRC_MODULE_ENABLED */
45
/*#define HAL_CRYP_MODULE_ENABLED */
46
/*#define HAL_DAC_MODULE_ENABLED */
47
/*#define HAL_DCMI_MODULE_ENABLED */
48
/*#define HAL_DMA2D_MODULE_ENABLED */
49
/*#define HAL_DFSDM_MODULE_ENABLED */
50
/*#define HAL_DSI_MODULE_ENABLED */
51
/*#define HAL_FIREWALL_MODULE_ENABLED */
52
/*#define HAL_GFXMMU_MODULE_ENABLED */
53
/*#define HAL_HCD_MODULE_ENABLED */
54
/*#define HAL_HASH_MODULE_ENABLED */
55
/*#define HAL_I2S_MODULE_ENABLED */
56
/*#define HAL_IRDA_MODULE_ENABLED */
57
/*#define HAL_IWDG_MODULE_ENABLED */
58
/*#define HAL_LTDC_MODULE_ENABLED */
59
/*#define HAL_LCD_MODULE_ENABLED */
60
/*#define HAL_LPTIM_MODULE_ENABLED */
61
/*#define HAL_MMC_MODULE_ENABLED */
62
/*#define HAL_NAND_MODULE_ENABLED */
63
/*#define HAL_NOR_MODULE_ENABLED */
64
/*#define HAL_OPAMP_MODULE_ENABLED */
65
/*#define HAL_OSPI_MODULE_ENABLED */
66
/*#define HAL_OSPI_MODULE_ENABLED */
67
/*#define HAL_PCD_MODULE_ENABLED */
68
/*#define HAL_PKA_MODULE_ENABLED */
69
/*#define HAL_QSPI_MODULE_ENABLED */
70
/*#define HAL_QSPI_MODULE_ENABLED */
71
/*#define HAL_RNG_MODULE_ENABLED */
72
#define HAL_RTC_MODULE_ENABLED
73
/*#define HAL_SAI_MODULE_ENABLED */
74
/*#define HAL_SD_MODULE_ENABLED */
75
/*#define HAL_SMBUS_MODULE_ENABLED */
76
/*#define HAL_SMARTCARD_MODULE_ENABLED */
77
#define HAL_SPI_MODULE_ENABLED
78
/*#define HAL_SRAM_MODULE_ENABLED */
79
/*#define HAL_SWPMI_MODULE_ENABLED */
80
/*#define HAL_TIM_MODULE_ENABLED */
81
/*#define HAL_TSC_MODULE_ENABLED */
82
#define HAL_UART_MODULE_ENABLED
83
/*#define HAL_USART_MODULE_ENABLED */
84
/*#define HAL_WWDG_MODULE_ENABLED */
85
/*#define HAL_EXTI_MODULE_ENABLED */
86
/*#define HAL_PSSI_MODULE_ENABLED */
87
#define HAL_GPIO_MODULE_ENABLED
88
#define HAL_EXTI_MODULE_ENABLED
89
#define HAL_DMA_MODULE_ENABLED
90
#define HAL_RCC_MODULE_ENABLED
91
#define HAL_FLASH_MODULE_ENABLED
92
#define HAL_PWR_MODULE_ENABLED
93
#define HAL_CORTEX_MODULE_ENABLED
94
95
/* ########################## Oscillator Values adaptation ####################*/
96
/**
97
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
98
* This value is used by the RCC HAL module to compute the system frequency
99
* (when HSE is used as system clock source, directly or through the PLL).
100
*/
101
#if !defined (HSE_VALUE)
102
#define HSE_VALUE ((uint32_t)8000000U)
/*!< Value of the External oscillator in Hz */
103
#endif
/* HSE_VALUE */
104
105
#if !defined (HSE_STARTUP_TIMEOUT)
106
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U)
/*!< Time out for HSE start up, in ms */
107
#endif
/* HSE_STARTUP_TIMEOUT */
108
109
/**
110
* @brief Internal Multiple Speed oscillator (MSI) default value.
111
* This value is the default MSI range value after Reset.
112
*/
113
#if !defined (MSI_VALUE)
114
#define MSI_VALUE ((uint32_t)4000000U)
/*!< Value of the Internal oscillator in Hz*/
115
#endif
/* MSI_VALUE */
116
/**
117
* @brief Internal High Speed oscillator (HSI) value.
118
* This value is used by the RCC HAL module to compute the system frequency
119
* (when HSI is used as system clock source, directly or through the PLL).
120
*/
121
#if !defined (HSI_VALUE)
122
#define HSI_VALUE ((uint32_t)16000000U)
/*!< Value of the Internal oscillator in Hz*/
123
#endif
/* HSI_VALUE */
124
125
/**
126
* @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
127
* This internal oscillator is mainly dedicated to provide a high precision clock to
128
* the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
129
* When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
130
* which is subject to manufacturing process variations.
131
*/
132
#if !defined (HSI48_VALUE)
133
#define HSI48_VALUE ((uint32_t)48000000U)
/*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
134
The real value my vary depending on manufacturing process variations.*/
135
#endif
/* HSI48_VALUE */
136
137
/**
138
* @brief Internal Low Speed oscillator (LSI) value.
139
*/
140
#if !defined (LSI_VALUE)
141
#define LSI_VALUE 32000U
/*!< LSI Typical Value in Hz*/
142
#endif
/* LSI_VALUE */
/*!< Value of the Internal Low Speed oscillator in Hz
143
The real value may vary depending on the variations
144
in voltage and temperature.*/
145
146
/**
147
* @brief External Low Speed oscillator (LSE) value.
148
* This value is used by the UART, RTC HAL module to compute the system frequency
149
*/
150
#if !defined (LSE_VALUE)
151
#define LSE_VALUE 32768U
/*!< Value of the External oscillator in Hz*/
152
#endif
/* LSE_VALUE */
153
154
#if !defined (LSE_STARTUP_TIMEOUT)
155
#define LSE_STARTUP_TIMEOUT 5000U
/*!< Time out for LSE start up, in ms */
156
#endif
/* HSE_STARTUP_TIMEOUT */
157
158
/**
159
* @brief External clock source for SAI1 peripheral
160
* This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
161
* frequency.
162
*/
163
#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
164
#define EXTERNAL_SAI1_CLOCK_VALUE 2097000U
/*!< Value of the SAI1 External clock source in Hz*/
165
#endif
/* EXTERNAL_SAI1_CLOCK_VALUE */
166
167
/**
168
* @brief External clock source for SAI2 peripheral
169
* This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
170
* frequency.
171
*/
172
#if !defined (EXTERNAL_SAI2_CLOCK_VALUE)
173
#define EXTERNAL_SAI2_CLOCK_VALUE 48000U
/*!< Value of the SAI2 External clock source in Hz*/
174
#endif
/* EXTERNAL_SAI2_CLOCK_VALUE */
175
176
/* Tip: To avoid modifying this file each time you need to use different HSE,
177
=== you can define the HSE value in your toolchain compiler preprocessor. */
178
179
/* ########################### System Configuration ######################### */
180
/**
181
* @brief This is the HAL system configuration section
182
*/
183
184
#define VDD_VALUE 3300U
/*!< Value of VDD in mv */
185
#define TICK_INT_PRIORITY 15U
/*!< tick interrupt priority */
186
#define USE_RTOS 0U
187
#define PREFETCH_ENABLE 0U
188
#define INSTRUCTION_CACHE_ENABLE 1U
189
#define DATA_CACHE_ENABLE 1U
190
191
/* ########################## Assert Selection ############################## */
192
/**
193
* @brief Uncomment the line below to expanse the "assert_param" macro in the
194
* HAL drivers code
195
*/
196
/* #define USE_FULL_ASSERT 1U */
197
198
/* ################## Register callback feature configuration ############### */
199
/**
200
* @brief Set below the peripheral configuration to "1U" to add the support
201
* of HAL callback registration/deregistration feature for the HAL
202
* driver(s). This allows user application to provide specific callback
203
* functions thanks to HAL_PPP_RegisterCallback() rather than overwriting
204
* the default weak callback functions (see each stm32l4xx_hal_ppp.h file
205
* for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef
206
* for each PPP peripheral).
207
*/
208
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U
209
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U
210
#define USE_HAL_COMP_REGISTER_CALLBACKS 0U
211
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U
212
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U
213
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U
214
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U
215
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U
216
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U
217
#define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U
218
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U
219
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U
220
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U
221
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U
222
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U
223
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U
224
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U
225
#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U
226
#define USE_HAL_OSPI_REGISTER_CALLBACKS 0U
227
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U
228
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U
229
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U
230
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U
231
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U
232
#define USE_HAL_SD_REGISTER_CALLBACKS 0U
233
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U
234
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U
235
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U
236
#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U
237
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U
238
#define USE_HAL_TSC_REGISTER_CALLBACKS 0U
239
#define USE_HAL_UART_REGISTER_CALLBACKS 0U
240
#define USE_HAL_USART_REGISTER_CALLBACKS 0U
241
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U
242
243
/* ################## SPI peripheral configuration ########################## */
244
245
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
246
* Activated: CRC code is present inside driver
247
* Deactivated: CRC code cleaned from driver
248
*/
249
250
#define USE_SPI_CRC 0U
251
252
/* Includes ------------------------------------------------------------------*/
253
/**
254
* @brief Include module's header file
255
*/
256
257
#ifdef HAL_RCC_MODULE_ENABLED
258
#include "stm32l4xx_hal_rcc.h"
259
#endif
/* HAL_RCC_MODULE_ENABLED */
260
261
#ifdef HAL_GPIO_MODULE_ENABLED
262
#include "stm32l4xx_hal_gpio.h"
263
#endif
/* HAL_GPIO_MODULE_ENABLED */
264
265
#ifdef HAL_DMA_MODULE_ENABLED
266
#include "stm32l4xx_hal_dma.h"
267
#endif
/* HAL_DMA_MODULE_ENABLED */
268
269
#ifdef HAL_DFSDM_MODULE_ENABLED
270
#include "stm32l4xx_hal_dfsdm.h"
271
#endif
/* HAL_DFSDM_MODULE_ENABLED */
272
273
#ifdef HAL_CORTEX_MODULE_ENABLED
274
#include "stm32l4xx_hal_cortex.h"
275
#endif
/* HAL_CORTEX_MODULE_ENABLED */
276
277
#ifdef HAL_ADC_MODULE_ENABLED
278
#include "stm32l4xx_hal_adc.h"
279
#endif
/* HAL_ADC_MODULE_ENABLED */
280
281
#ifdef HAL_CAN_MODULE_ENABLED
282
#include "stm32l4xx_hal_can.h"
283
#endif
/* HAL_CAN_MODULE_ENABLED */
284
285
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
286
#include "Legacy/stm32l4xx_hal_can_legacy.h"
287
#endif
/* HAL_CAN_LEGACY_MODULE_ENABLED */
288
289
#ifdef HAL_COMP_MODULE_ENABLED
290
#include "stm32l4xx_hal_comp.h"
291
#endif
/* HAL_COMP_MODULE_ENABLED */
292
293
#ifdef HAL_CRC_MODULE_ENABLED
294
#include "stm32l4xx_hal_crc.h"
295
#endif
/* HAL_CRC_MODULE_ENABLED */
296
297
#ifdef HAL_CRYP_MODULE_ENABLED
298
#include "stm32l4xx_hal_cryp.h"
299
#endif
/* HAL_CRYP_MODULE_ENABLED */
300
301
#ifdef HAL_DAC_MODULE_ENABLED
302
#include "stm32l4xx_hal_dac.h"
303
#endif
/* HAL_DAC_MODULE_ENABLED */
304
305
#ifdef HAL_DCMI_MODULE_ENABLED
306
#include "stm32l4xx_hal_dcmi.h"
307
#endif
/* HAL_DCMI_MODULE_ENABLED */
308
309
#ifdef HAL_DMA2D_MODULE_ENABLED
310
#include "stm32l4xx_hal_dma2d.h"
311
#endif
/* HAL_DMA2D_MODULE_ENABLED */
312
313
#ifdef HAL_DSI_MODULE_ENABLED
314
#include "stm32l4xx_hal_dsi.h"
315
#endif
/* HAL_DSI_MODULE_ENABLED */
316
317
#ifdef HAL_EXTI_MODULE_ENABLED
318
#include "stm32l4xx_hal_exti.h"
319
#endif
/* HAL_EXTI_MODULE_ENABLED */
320
321
#ifdef HAL_GFXMMU_MODULE_ENABLED
322
#include "stm32l4xx_hal_gfxmmu.h"
323
#endif
/* HAL_GFXMMU_MODULE_ENABLED */
324
325
#ifdef HAL_FIREWALL_MODULE_ENABLED
326
#include "stm32l4xx_hal_firewall.h"
327
#endif
/* HAL_FIREWALL_MODULE_ENABLED */
328
329
#ifdef HAL_FLASH_MODULE_ENABLED
330
#include "stm32l4xx_hal_flash.h"
331
#endif
/* HAL_FLASH_MODULE_ENABLED */
332
333
#ifdef HAL_HASH_MODULE_ENABLED
334
#include "stm32l4xx_hal_hash.h"
335
#endif
/* HAL_HASH_MODULE_ENABLED */
336
337
#ifdef HAL_HCD_MODULE_ENABLED
338
#include "stm32l4xx_hal_hcd.h"
339
#endif
/* HAL_HCD_MODULE_ENABLED */
340
341
#ifdef HAL_I2C_MODULE_ENABLED
342
#include "stm32l4xx_hal_i2c.h"
343
#endif
/* HAL_I2C_MODULE_ENABLED */
344
345
#ifdef HAL_IRDA_MODULE_ENABLED
346
#include "stm32l4xx_hal_irda.h"
347
#endif
/* HAL_IRDA_MODULE_ENABLED */
348
349
#ifdef HAL_IWDG_MODULE_ENABLED
350
#include "stm32l4xx_hal_iwdg.h"
351
#endif
/* HAL_IWDG_MODULE_ENABLED */
352
353
#ifdef HAL_LCD_MODULE_ENABLED
354
#include "stm32l4xx_hal_lcd.h"
355
#endif
/* HAL_LCD_MODULE_ENABLED */
356
357
#ifdef HAL_LPTIM_MODULE_ENABLED
358
#include "stm32l4xx_hal_lptim.h"
359
#endif
/* HAL_LPTIM_MODULE_ENABLED */
360
361
#ifdef HAL_LTDC_MODULE_ENABLED
362
#include "stm32l4xx_hal_ltdc.h"
363
#endif
/* HAL_LTDC_MODULE_ENABLED */
364
365
#ifdef HAL_MMC_MODULE_ENABLED
366
#include "stm32l4xx_hal_mmc.h"
367
#endif
/* HAL_MMC_MODULE_ENABLED */
368
369
#ifdef HAL_NAND_MODULE_ENABLED
370
#include "stm32l4xx_hal_nand.h"
371
#endif
/* HAL_NAND_MODULE_ENABLED */
372
373
#ifdef HAL_NOR_MODULE_ENABLED
374
#include "stm32l4xx_hal_nor.h"
375
#endif
/* HAL_NOR_MODULE_ENABLED */
376
377
#ifdef HAL_OPAMP_MODULE_ENABLED
378
#include "stm32l4xx_hal_opamp.h"
379
#endif
/* HAL_OPAMP_MODULE_ENABLED */
380
381
#ifdef HAL_OSPI_MODULE_ENABLED
382
#include "stm32l4xx_hal_ospi.h"
383
#endif
/* HAL_OSPI_MODULE_ENABLED */
384
385
#ifdef HAL_PCD_MODULE_ENABLED
386
#include "stm32l4xx_hal_pcd.h"
387
#endif
/* HAL_PCD_MODULE_ENABLED */
388
389
#ifdef HAL_PKA_MODULE_ENABLED
390
#include "stm32l4xx_hal_pka.h"
391
#endif
/* HAL_PKA_MODULE_ENABLED */
392
393
#ifdef HAL_PSSI_MODULE_ENABLED
394
#include "stm32l4xx_hal_pssi.h"
395
#endif
/* HAL_PSSI_MODULE_ENABLED */
396
397
#ifdef HAL_PWR_MODULE_ENABLED
398
#include "stm32l4xx_hal_pwr.h"
399
#endif
/* HAL_PWR_MODULE_ENABLED */
400
401
#ifdef HAL_QSPI_MODULE_ENABLED
402
#include "stm32l4xx_hal_qspi.h"
403
#endif
/* HAL_QSPI_MODULE_ENABLED */
404
405
#ifdef HAL_RNG_MODULE_ENABLED
406
#include "stm32l4xx_hal_rng.h"
407
#endif
/* HAL_RNG_MODULE_ENABLED */
408
409
#ifdef HAL_RTC_MODULE_ENABLED
410
#include "stm32l4xx_hal_rtc.h"
411
#endif
/* HAL_RTC_MODULE_ENABLED */
412
413
#ifdef HAL_SAI_MODULE_ENABLED
414
#include "stm32l4xx_hal_sai.h"
415
#endif
/* HAL_SAI_MODULE_ENABLED */
416
417
#ifdef HAL_SD_MODULE_ENABLED
418
#include "stm32l4xx_hal_sd.h"
419
#endif
/* HAL_SD_MODULE_ENABLED */
420
421
#ifdef HAL_SMARTCARD_MODULE_ENABLED
422
#include "stm32l4xx_hal_smartcard.h"
423
#endif
/* HAL_SMARTCARD_MODULE_ENABLED */
424
425
#ifdef HAL_SMBUS_MODULE_ENABLED
426
#include "stm32l4xx_hal_smbus.h"
427
#endif
/* HAL_SMBUS_MODULE_ENABLED */
428
429
#ifdef HAL_SPI_MODULE_ENABLED
430
#include "stm32l4xx_hal_spi.h"
431
#endif
/* HAL_SPI_MODULE_ENABLED */
432
433
#ifdef HAL_SRAM_MODULE_ENABLED
434
#include "stm32l4xx_hal_sram.h"
435
#endif
/* HAL_SRAM_MODULE_ENABLED */
436
437
#ifdef HAL_SWPMI_MODULE_ENABLED
438
#include "stm32l4xx_hal_swpmi.h"
439
#endif
/* HAL_SWPMI_MODULE_ENABLED */
440
441
#ifdef HAL_TIM_MODULE_ENABLED
442
#include "stm32l4xx_hal_tim.h"
443
#endif
/* HAL_TIM_MODULE_ENABLED */
444
445
#ifdef HAL_TSC_MODULE_ENABLED
446
#include "stm32l4xx_hal_tsc.h"
447
#endif
/* HAL_TSC_MODULE_ENABLED */
448
449
#ifdef HAL_UART_MODULE_ENABLED
450
#include "stm32l4xx_hal_uart.h"
451
#endif
/* HAL_UART_MODULE_ENABLED */
452
453
#ifdef HAL_USART_MODULE_ENABLED
454
#include "stm32l4xx_hal_usart.h"
455
#endif
/* HAL_USART_MODULE_ENABLED */
456
457
#ifdef HAL_WWDG_MODULE_ENABLED
458
#include "stm32l4xx_hal_wwdg.h"
459
#endif
/* HAL_WWDG_MODULE_ENABLED */
460
461
/* Exported macro ------------------------------------------------------------*/
462
#ifdef USE_FULL_ASSERT
463
/**
464
* @brief The assert_param macro is used for function's parameters check.
465
* @param expr If expr is false, it calls assert_failed function
466
* which reports the name of the source file and the source
467
* line number of the call that failed.
468
* If expr is true, it returns no value.
469
* @retval None
470
*/
471
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
472
/* Exported functions ------------------------------------------------------- */
473
void
assert_failed(uint8_t *file, uint32_t line);
474
#else
475
#define assert_param(expr) ((void)0U)
476
#endif
/* USE_FULL_ASSERT */
477
478
#ifdef __cplusplus
479
}
480
#endif
481
482
#endif
/* STM32L4xx_HAL_CONF_H */