example_detector_distance_low_power_off.c

This is an example on how to disable the sensor and put the system in a low power state between measurements
The example executes as follows:

• Create a distance configuration
• Create a sensor instance
• Enable sensor
• Create a detector instance
• Calibrate the sensor
• Calibrate the detector
  • Disable sensor
• Loop forever:
  • Enable sensor
  • Prepare the detector
  • Perform a sensor measurement and read out the data
  • Disable sensor
  • Process the measurement and get detector result
  • Put the system in deep sleep for a specified amount of time
• Destroy the configuration
• Destroy the detector instance
• Destroy the sensor instance

// Copyright (c) Acconeer AB, 2023-2024
// All rights reserved
// This file is subject to the terms and conditions defined in the file
// 'LICENSES/license_acconeer.txt', (BSD 3-Clause License) which is part
// of this source code package.
 
#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
 
#include "acc_definitions_a121.h"
#include "acc_definitions_common.h"
#include "acc_detector_distance.h"
#include "acc_hal_definitions_a121.h"
#include "acc_hal_integration_a121.h"
#include "acc_integration.h"
#include "acc_integration_log.h"
#include "acc_rss_a121.h"
#include "acc_sensor.h"
 
#include "acc_version.h"
 
/** \example example_detector_distance_low_power_off.c
 * @brief This is an example on how to disable the sensor and put the system in a low power state between measurements
 * @n
 * The example executes as follows:
 *   - Create a distance configuration
 *   - Create a sensor instance
 *   - Enable sensor
 *   - Create a detector instance
 *   - Calibrate the sensor
 *   - Calibrate the detector
 *    - Disable sensor
 *   - Loop forever:
 *     - Enable sensor
 *     - Prepare the detector
 *     - Perform a sensor measurement and read out the data
 *     - Disable sensor
 *     - Process the measurement and get detector result
 *     - Put the system in deep sleep for a specified amount of time
 *   - Destroy the configuration
 *   - Destroy the detector instance
 *   - Destroy the sensor instance
 */
 
typedef enum
{
        DISTANCE_PRESET_CONFIG_NONE = 0,
        DISTANCE_PRESET_CONFIG_BALANCED,
        DISTANCE_PRESET_CONFIG_HIGH_ACCURACY,
} distance_preset_config_t;
 
#define SENSOR_ID           (1U)
#define SENSOR_TIMEOUT_MS   (1000U)
#define DEFAULT_UPDATE_RATE (1.0f)
 
static void print_result(acc_detector_distance_result_t *result);
 
static void cleanup(acc_detector_distance_handle_t *distance_handle,
                    acc_detector_distance_config_t *distance_config,
                    acc_sensor_t                   *sensor,
                    void                           *buffer,
                    uint8_t                        *detector_cal_result_static);
 
static void set_config(acc_detector_distance_config_t *detector_config, distance_preset_config_t preset);
 
int acconeer_main(int argc, char *argv[]);
 
int acconeer_main(int argc, char *argv[])
{
        (void)argc;
        (void)argv;
        acc_detector_distance_config_t   *distance_config                 = NULL;
        acc_detector_distance_handle_t   *distance_handle                 = NULL;
        acc_sensor_t                     *sensor                          = NULL;
        void                             *buffer                          = NULL;
        uint8_t                          *detector_cal_result_static      = NULL;
        uint32_t                          buffer_size                     = 0U;
        uint32_t                          detector_cal_result_static_size = 0U;
        acc_detector_cal_result_dynamic_t detector_cal_result_dynamic     = {0};
 
        printf("Acconeer software version %s\n", acc_version_get());
 
        const acc_hal_a121_t *hal = acc_hal_rss_integration_get_implementation();
 
        if (!acc_rss_hal_register(hal))
        {
                return EXIT_FAILURE;
        }
 
        distance_config = acc_detector_distance_config_create();
        if (distance_config == NULL)
        {
                printf("acc_detector_distance_config_create() failed\n");
                cleanup(distance_handle, distance_config, sensor, buffer, detector_cal_result_static);
                return EXIT_FAILURE;
        }
 
        set_config(distance_config, DISTANCE_PRESET_CONFIG_BALANCED);
 
        uint32_t sleep_time_ms = (uint32_t)(1000.0f / DEFAULT_UPDATE_RATE);
 
        acc_integration_set_periodic_wakeup(sleep_time_ms);
 
        distance_handle = acc_detector_distance_create(distance_config);
        if (distance_handle == NULL)
        {
                printf("acc_detector_distance_create() failed\n");
                cleanup(distance_handle, distance_config, sensor, buffer, detector_cal_result_static);
                return EXIT_FAILURE;
        }
 
        if (!acc_detector_distance_get_sizes(distance_handle, &buffer_size, &detector_cal_result_static_size))
        {
                printf("acc_detector_distance_get_buffer_size() failed\n");
                cleanup(distance_handle, distance_config, sensor, buffer, detector_cal_result_static);
                return EXIT_FAILURE;
        }
 
        buffer = acc_integration_mem_alloc(buffer_size);
        if (buffer == NULL)
        {
                printf("buffer allocation failed\n");
                cleanup(distance_handle, distance_config, sensor, buffer, detector_cal_result_static);
                return EXIT_FAILURE;
        }
 
        detector_cal_result_static = acc_integration_mem_alloc(detector_cal_result_static_size);
        if (detector_cal_result_static == NULL)
        {
                printf("buffer allocation failed\n");
                cleanup(distance_handle, distance_config, sensor, buffer, detector_cal_result_static);
                return EXIT_FAILURE;
        }
 
        acc_hal_integration_sensor_supply_on(SENSOR_ID);
        acc_hal_integration_sensor_enable(SENSOR_ID);
 
        sensor = acc_sensor_create(SENSOR_ID);
        if (sensor == NULL)
        {
                printf("acc_sensor_create() failed\n");
                cleanup(distance_handle, distance_config, sensor, buffer, detector_cal_result_static);
                return EXIT_FAILURE;
        }
 
        // Calibrate sensor
        bool             status;
        bool             cal_complete = false;
        acc_cal_result_t sensor_cal_result;
 
        do
        {
                status = acc_sensor_calibrate(sensor, &cal_complete, &sensor_cal_result, buffer, buffer_size);
 
                if (cal_complete)
                {
                        break;
                }
 
                if (status)
                {
                        status = acc_hal_integration_wait_for_sensor_interrupt(SENSOR_ID, SENSOR_TIMEOUT_MS);
                }
        } while (status);
 
        if (!status)
        {
                printf("acc_sensor_calibrate() failed\n");
                cleanup(distance_handle, distance_config, sensor, buffer, detector_cal_result_static);
                return EXIT_FAILURE;
        }
 
        /* Reset sensor after calibration by disabling/enabling it */
        acc_hal_integration_sensor_disable(SENSOR_ID);
        acc_hal_integration_sensor_enable(SENSOR_ID);
 
        // Calibrate detector
        bool done = false;
 
        do
        {
                status = acc_detector_distance_calibrate(sensor,
                                                         distance_handle,
                                                         &sensor_cal_result,
                                                         buffer,
                                                         buffer_size,
                                                         detector_cal_result_static,
                                                         detector_cal_result_static_size,
                                                         &detector_cal_result_dynamic,
                                                         &done);
 
                if (done)
                {
                        break;
                }
 
                if (status)
                {
                        status = acc_hal_integration_wait_for_sensor_interrupt(SENSOR_ID, SENSOR_TIMEOUT_MS);
                }
        } while (status);
 
        if (!status)
        {
                printf("acc_detector_distance_calibrate() failed\n");
                cleanup(distance_handle, distance_config, sensor, buffer, detector_cal_result_static);
                return EXIT_FAILURE;
        }
 
        acc_hal_integration_sensor_disable(SENSOR_ID);
 
        while (true)
        {
                acc_detector_distance_result_t result;
 
                acc_hal_integration_sensor_enable(SENSOR_ID);
 
                bool result_available = false;
 
                do
                {
                        if (!acc_detector_distance_prepare(distance_handle, distance_config, sensor, &sensor_cal_result, buffer, buffer_size))
                        {
                                printf("acc_detector_distance_prepare() failed\n");
                                cleanup(distance_handle, distance_config, sensor, buffer, detector_cal_result_static);
                                return EXIT_FAILURE;
                        }
 
                        if (!acc_sensor_measure(sensor))
                        {
                                printf("acc_sensor_measure failed\n");
                                cleanup(distance_handle, distance_config, sensor, buffer, detector_cal_result_static);
                                return EXIT_FAILURE;
                        }
 
                        if (!acc_hal_integration_wait_for_sensor_interrupt(SENSOR_ID, SENSOR_TIMEOUT_MS))
                        {
                                printf("Sensor interrupt timeout\n");
                                cleanup(distance_handle, distance_config, sensor, buffer, detector_cal_result_static);
                                return EXIT_FAILURE;
                        }
 
                        if (!acc_sensor_read(sensor, buffer, buffer_size))
                        {
                                printf("acc_sensor_read failed\n");
                                cleanup(distance_handle, distance_config, sensor, buffer, detector_cal_result_static);
                                return EXIT_FAILURE;
                        }
 
                        if (!acc_detector_distance_process(distance_handle,
                                                           buffer,
                                                           detector_cal_result_static,
                                                           &detector_cal_result_dynamic,
                                                           &result_available,
                                                           &result))
                        {
                                printf("acc_detector_distance_process failed\n");
                                cleanup(distance_handle, distance_config, sensor, buffer, detector_cal_result_static);
                                return EXIT_FAILURE;
                        }
                } while (!result_available);
 
                acc_hal_integration_sensor_disable(SENSOR_ID);
 
                print_result(&result);
 
                acc_integration_sleep_until_periodic_wakeup();
        }
 
        cleanup(distance_handle, distance_config, sensor, buffer, detector_cal_result_static);
 
        printf("Application finished OK\n");
 
        return EXIT_SUCCESS;
}
 
static void cleanup(acc_detector_distance_handle_t *distance_handle,
                    acc_detector_distance_config_t *distance_config,
                    acc_sensor_t                   *sensor,
                    void                           *buffer,
                    uint8_t                        *detector_cal_result_static)
{
        acc_hal_integration_sensor_disable(SENSOR_ID);
        acc_hal_integration_sensor_supply_off(SENSOR_ID);
 
        if (distance_config != NULL)
        {
                acc_detector_distance_config_destroy(distance_config);
        }
 
        if (distance_handle != NULL)
        {
                acc_detector_distance_destroy(distance_handle);
        }
 
        if (sensor != NULL)
        {
                acc_sensor_destroy(sensor);
        }
 
        if (buffer != NULL)
        {
                acc_integration_mem_free(buffer);
        }
 
        if (detector_cal_result_static != NULL)
        {
                acc_integration_mem_free(detector_cal_result_static);
        }
}
 
static void set_config(acc_detector_distance_config_t *detector_config, distance_preset_config_t preset)
{
        // Add configuration of the detector here
        switch (preset)
        {
                case DISTANCE_PRESET_CONFIG_NONE:
                        // Add configuration of the detector here
                        break;
 
                case DISTANCE_PRESET_CONFIG_BALANCED:
                        acc_detector_distance_config_start_set(detector_config, 0.25f);
                        acc_detector_distance_config_end_set(detector_config, 3.0f);
                        acc_detector_distance_config_max_step_length_set(detector_config, 0U);
                        acc_detector_distance_config_max_profile_set(detector_config, ACC_CONFIG_PROFILE_5);
                        acc_detector_distance_config_reflector_shape_set(detector_config, ACC_DETECTOR_DISTANCE_REFLECTOR_SHAPE_GENERIC);
                        acc_detector_distance_config_peak_sorting_set(detector_config, ACC_DETECTOR_DISTANCE_PEAK_SORTING_STRONGEST);
                        acc_detector_distance_config_threshold_method_set(detector_config, ACC_DETECTOR_DISTANCE_THRESHOLD_METHOD_CFAR);
                        acc_detector_distance_config_threshold_sensitivity_set(detector_config, 0.5f);
                        acc_detector_distance_config_signal_quality_set(detector_config, 15.0f);
                        acc_detector_distance_config_close_range_leakage_cancellation_set(detector_config, false);
                        break;
 
                case DISTANCE_PRESET_CONFIG_HIGH_ACCURACY:
                        acc_detector_distance_config_start_set(detector_config, 0.25f);
                        acc_detector_distance_config_end_set(detector_config, 3.0f);
                        acc_detector_distance_config_max_step_length_set(detector_config, 2U);
                        acc_detector_distance_config_max_profile_set(detector_config, ACC_CONFIG_PROFILE_3);
                        acc_detector_distance_config_reflector_shape_set(detector_config, ACC_DETECTOR_DISTANCE_REFLECTOR_SHAPE_GENERIC);
                        acc_detector_distance_config_peak_sorting_set(detector_config, ACC_DETECTOR_DISTANCE_PEAK_SORTING_STRONGEST);
                        acc_detector_distance_config_threshold_method_set(detector_config, ACC_DETECTOR_DISTANCE_THRESHOLD_METHOD_CFAR);
                        acc_detector_distance_config_threshold_sensitivity_set(detector_config, 0.5f);
                        acc_detector_distance_config_signal_quality_set(detector_config, 20.0f);
                        acc_detector_distance_config_close_range_leakage_cancellation_set(detector_config, false);
                        break;
        }
}
 
static void print_result(acc_detector_distance_result_t *result)
{
        printf("%d detected distances", result->num_distances);
        if (result->num_distances > 0)
        {
                printf(": ");
 
                for (uint8_t i = 0; i < result->num_distances; i++)
                {
                        printf("%" PRIfloat "m ", ACC_LOG_FLOAT_TO_INTEGER(result->distances[i]));
                }
        }
 
        printf("\n");
}