|
|
#include <stdbool.h>#include <stdint.h>#include <stdio.h>#include <stdlib.h>#include "acc_config.h"#include "acc_definitions_a121.h"#include "acc_definitions_common.h"#include "acc_hal_definitions_a121.h"#include "acc_hal_integration_a121.h"#include "acc_integration.h"#include "acc_processing.h"#include "acc_rss_a121.h"#include "acc_sensor.h"#include "acc_version.h"Go to the source code of this file.
Macros | |
| #define | SENSOR_ID (1U) |
| #define | SENSOR_TIMEOUT_MS (1000U) |
| #define | MAX_DATA_ENTRY_LEN 15 |
| #define | SUSPEND_TIME_BETWEEN_UPDATES_MS (10000) |
Functions | |
| static void | set_config (acc_config_t *config) |
| static void | print_data (acc_int16_complex_t *data, uint16_t data_length) |
| static void | cleanup (acc_config_t *config, acc_processing_t *processing, acc_sensor_t *sensor, void *buffer) |
| int | acconeer_main (int argc, char *argv[]) |
| Assembly test example. More... | |
| #define MAX_DATA_ENTRY_LEN 15 |
Definition at line 47 of file example_service_low_power_sensor_hibernate.c.
| #define SENSOR_ID (1U) |
Definition at line 45 of file example_service_low_power_sensor_hibernate.c.
| #define SENSOR_TIMEOUT_MS (1000U) |
Definition at line 46 of file example_service_low_power_sensor_hibernate.c.
| #define SUSPEND_TIME_BETWEEN_UPDATES_MS (10000) |
Definition at line 49 of file example_service_low_power_sensor_hibernate.c.
| int acconeer_main | ( | int | argc, |
| char * | argv[] | ||
| ) |
Assembly test example.
Touchless button application.
Tank level reference application.
Smart presence reference application.
Parking application.
Breathing example application.
Waste level application.
Vibration example.
Surface velocity example application.
Service subsweeps example.
Service multple configurations example.
Low power service example.
Service sensor calibration caching example.
Service example.
Processing subtract adaptive background example.
Processing static presence example.
Processing peak interpolation example.
Processing noncoherent mean example.
Processing coherent mean example.
Processing amplitude example.
hand motion application
Detector presence example with multiple configurations.
Low power detector presence example.
Detector presence example.
Detector distance example with iq data print.
Distance detector low power example.
Detector distance with calibration caching example.
Detector distance example.
Control helper example.
Cargo application.
Test if measure on wake up is enable Do a measurement if the the detector is ready (configured and calibrated)
Test if measure on wake up is enable Do a measurement if the the detector is ready (configured and calibrated)
Detector filters and states are reset on prepare (reconfiguration) to avoid risk of false detections when switching back to a zone.
Detector filters and states are reset on prepare (reconfiguration) to avoid risk of false detections when switching back to a zone.
Definition at line 59 of file example_service_low_power_sensor_hibernate.c.
|
static |
Definition at line 238 of file example_service_low_power_sensor_hibernate.c.
|
static |
Definition at line 264 of file example_service_low_power_sensor_hibernate.c.
|
static |
Definition at line 284 of file example_service_low_power_sensor_hibernate.c.