|
|
#include <stdbool.h>#include <stdio.h>#include <stdlib.h>#include "acc_config.h"#include "acc_hal_definitions_a121.h"#include "acc_hal_integration_a121.h"#include "acc_integration.h"#include "acc_processing.h"#include "acc_rss_a121.h"#include "acc_sensor.h"#include "acc_version.h"#include "example_hand_motion_detection.h"#include "example_hand_motion_detection_main.h"Go to the source code of this file.
Macros | |
| #define | SENSOR_ID (1U) |
| #define | SENSOR_TIMEOUT_MS (1000U) |
Functions | |
| static void | cleanup (acc_sensor_t *sensor, void *buffer, hand_motion_detection_config_t *config, hand_motion_detection_handle_t *handle) |
| Frees any allocated resources. More... | |
| static bool | do_sensor_calibration (acc_sensor_t *sensor, acc_cal_result_t *cal_result, void *buffer, uint32_t buffer_size) |
| Performs sensor calibration (with retry) More... | |
| static bool | handle_indications (hand_motion_detection_handle_t *handle, hand_motion_detection_result_t *result, acc_sensor_t *sensor, acc_cal_result_t *cal_result, void *buffer, uint32_t buffer_size, bool *data_reliable) |
| Handle sensor indications. More... | |
| static void | print_hand_motion_detection_result (const hand_motion_detection_result_t *result) |
| Print a processor result in a human-readable format. More... | |
| static bool | enter_hibernate (acc_sensor_t *sensor) |
| static bool | exit_hibernate (acc_sensor_t *sensor) |
| int | acconeer_main (int argc, char *argv[]) |
| Assembly test example. More... | |
| #define SENSOR_ID (1U) |
Definition at line 22 of file example_hand_motion_detection_main.c.
| #define SENSOR_TIMEOUT_MS (1000U) |
Definition at line 23 of file example_hand_motion_detection_main.c.
| int acconeer_main | ( | int | argc, |
| char * | argv[] | ||
| ) |
Assembly test example.
Touchless button application.
Tank level reference application.
Smart presence reference application.
Parking application.
Breathing example application.
Waste level application.
Vibration example.
Surface velocity example application.
Service subsweeps example.
Service multple configurations example.
Low power service example.
Service sensor calibration caching example.
Service example.
Processing subtract adaptive background example.
Processing static presence example.
Processing peak interpolation example.
Processing noncoherent mean example.
Processing coherent mean example.
Processing amplitude example.
hand motion application
Detector presence example with multiple configurations.
Low power detector presence example.
Detector presence example.
Detector distance example with iq data print.
Distance detector low power example.
Detector distance with calibration caching example.
Detector distance example.
Control helper example.
Cargo application.
Test if measure on wake up is enable Do a measurement if the the detector is ready (configured and calibrated)
Test if measure on wake up is enable Do a measurement if the the detector is ready (configured and calibrated)
Detector filters and states are reset on prepare (reconfiguration) to avoid risk of false detections when switching back to a zone.
Detector filters and states are reset on prepare (reconfiguration) to avoid risk of false detections when switching back to a zone.
Definition at line 55 of file example_hand_motion_detection_main.c.
|
static |
Frees any allocated resources.
Definition at line 210 of file example_hand_motion_detection_main.c.
|
static |
Performs sensor calibration (with retry)
Definition at line 236 of file example_hand_motion_detection_main.c.
|
static |
Definition at line 369 of file example_hand_motion_detection_main.c.
|
static |
Definition at line 384 of file example_hand_motion_detection_main.c.
|
static |
Handle sensor indications.
Definition at line 270 of file example_hand_motion_detection_main.c.
|
static |
Print a processor result in a human-readable format.
Definition at line 346 of file example_hand_motion_detection_main.c.